Start-X Remote Starter Kit for Ford F-150 (2015, 2016, 2017, 2018, 2019, 2020) Trucks | Push-to-Start or Key Ignition | Settings Enabled | Plug N Play | Lock 3X to Remote Start | Zero Wire Splicing

Start-X Remote Starter Kit for Ford F-150 (2015, 2016, 2017, 2018, 2019, 2020) Trucks | Push-to-Start or Key Ignition | Settings Enabled | Plug N Play | Lock 3X to Remote Start | Zero Wire Splicing

• 𝗗𝗜𝗬 𝗿𝗲𝗺𝗼𝘁𝗲 𝘀𝘁𝗮𝗿𝘁 𝗸𝗶𝘁: Add remote start functionality to your vehicle for a fraction of the cost. Enjoy a comfortable driving experience from the start by pre-heating and defrosting your windshield in the winter or cooling down your vehicle before entering in the summer. Change duration between 5, 10, or 15 minutes. Adjust climate control settings and access remote start settings in your dash.
• 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆: Ford F-150 (2015, 2016, 2017, 2018, 2019, 2020) models with either push-to-start or key ignition. Vehicle must be equipped with a hood pin.
• 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: This kit is designed for both push-to-start and key blade ignition vehicles. Gas and automatic transmission only. Hood pin required. Factory remote required. Some vehicle disassembly may be required; see installation guide for details. As a safety precaution, vehicle will shut down when door is opened; vehicle must be restarted before driving. Vehicle will NOT remote start if check engine light is on or fuel is low.
• *𝗪𝗔𝗥𝗡𝗜𝗡𝗚: Your vehicle must have an OEM hood pin for the remote starter to work. Please ensure you have a hood pin before ordering. To check, open the hood and start the engine. If you have a hood pin you will see an indicator on the dash that your hood is ajar.
• 𝗡𝗼 𝗻𝗲𝗲𝗱 𝗳𝗼𝗿 𝗲𝘅𝘁𝗿𝗮 𝗱𝗲𝘃𝗶𝗰𝗲𝘀: Start your vehicle by pressing lock 3X on your factory remote. Press lock 3X again to turn off vehicle. Factory remote required – no remote is included in this kit. The distance you can remote start from is the same distance you can lock/unlock your vehicle. Extend your range with a Start-X RF kit (sold separately).
• 𝗣𝗹𝘂𝗴 𝗻 𝗽𝗹𝗮𝘆 𝗶𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻: Included vehicle-specific T-harness eliminates wire cutting and splicing for fast, easy install. Installation video provides clear step-by-step instructions. Module is pre-flashed for your vehicle’s firmware to ensure seamless integration. Technical and customer support team available for additional help.

Product information

Technical Details